Author Index

A

  • Abdali, Nosratalah Determining the Optimal Amount of Oxide Flux in A-TIG Welding of HSLA-100 Steel [Volume 30, Issue 2, 2019, Pages 103-112]
  • Abdollahzadeh, Amir The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Abdous, Hosein Thermodynamics and Kinetics of Immersion Behavior of IC221M Alloy as a Separator in Molten Carbonate Fuel Cell [Volume 30, Issue 1, 2018, Pages 43-54]
  • Assadi, Hamid The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Azadbeh, Maziyar Compacting Pressure Effect on Densification in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder [Volume 30, Issue 2, 2019, Pages 140-149]
  • Azari Khosroshahi, Rasoul Friction Stir Welding of 430 Ferritic Stainless Steel [Volume 30, Issue 2, 2019, Pages 119-126]

B

  • Baniadam, Majid Electrochemical Functionalization of Graphene in an Extensive Range of Electrical Power [Volume 30, Issue 1, 2018, Pages 1-12]
  • Banna, Hosein Thermodynamics and Kinetics of Immersion Behavior of IC221M Alloy as a Separator in Molten Carbonate Fuel Cell [Volume 30, Issue 1, 2018, Pages 43-54]
  • Banna, Hosein Rapid Heating Effects on Microstructure and Thermal Stability of a Ni3Al Base Alloy, IC221M [Volume 30, Issue 1, 2018, Pages 91-100]

D

  • Daneshvar Asl, Shervin Improvement of the Photovoltaic Performance of Dye-Sensitized Solar Cell by Using TiO2:CNT Nanocomposite Photoanode [Volume 30, Issue 1, 2018, Pages 101-110]

E

  • Ebrahimi, Ali Reza Determining the Optimal Amount of Oxide Flux in A-TIG Welding of HSLA-100 Steel [Volume 30, Issue 2, 2019, Pages 103-112]
  • Entesari, Sina The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]

F

  • Fazel-Najafabadi, Mahmoud Fabrication of Fe/TiC Surface Composite on Carbon Steel Using SMAW Process [Volume 30, Issue 2, 2019, Pages 57-66]

G

  • Ghasemi, Somayeh Compacting Pressure Effect on Densification in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder [Volume 30, Issue 2, 2019, Pages 140-149]
  • Ghobeiti-Hasab, Mehdi Effect of Bainite Morphology on the Mechanical Properties of a Ferrite- Bainite- Martensite Triple-Phase Steel [Volume 30, Issue 1, 2018, Pages 55-66]

H

  • Hasani, Ali Electrochemical Functionalization of Graphene in an Extensive Range of Electrical Power [Volume 30, Issue 1, 2018, Pages 1-12]
  • Heidari Boroujeni, Homeyra Effect of Ceria on Phase Behavior and Photocatalytic Properties of Colloidal and Polymeric Nano-Titania [Volume 30, Issue 1, 2018, Pages 111-120]
  • Hosseini, Sayed Rahman The Effect of Low Temperature Austempering on Microstructure, Mechanical and Wear Properties of AISI 52100 Steel [Volume 30, Issue 1, 2018, Pages 13-28]

I

  • Irannajad, Mehdi Selective Extraction of Copper from Nickel by D2EHPA in the Presence of Tartaric Acid and Sodium Acetate Additives [Volume 30, Issue 2, 2019, Pages 1-8]

K

  • Kamran Haghighi, Hossein Selective Extraction of Copper from Nickel by D2EHPA in the Presence of Tartaric Acid and Sodium Acetate Additives [Volume 30, Issue 2, 2019, Pages 1-8]
  • Karamian, Ebrahim Fabrication of Fe/TiC Surface Composite on Carbon Steel Using SMAW Process [Volume 30, Issue 2, 2019, Pages 57-66]
  • Karimi Zarchi, Hamid Reza Pyrometallurgical Recovery of Metallic Zinc from Galvanizing Dust by Using Ammonium Chloride Flux [Volume 30, Issue 1, 2018, Pages 155-163]
  • Keshavarz Alamdari, Eskandar The Effect of Number and Width of Baffles on Mixing Time in Copper Solvent Extraction Dynamic Mixers: CFD Simulation and Direct Photography [Volume 30, Issue 2, 2019, Pages 113-118]
  • Khani, Somayeh Study of Dynamic Precipitation during Severe Plastic Deformation of Cast AZ91 Alloy and Its Influence on Microstructure and Mechanical Properties [Volume 30, Issue 2, 2019, Pages 9-20]
  • Kiani-Rashid, Alireza Characterization of Apatite Glass-Ceramic Coatings on Ti-6Al-4V Substrate by Sol-Gel Method for Medical Application [Volume 30, Issue 2, 2019, Pages 91-102]

M

  • Maghrebi, Morteza Electrochemical Functionalization of Graphene in an Extensive Range of Electrical Power [Volume 30, Issue 1, 2018, Pages 1-12]
  • Mahmoodan, Morteza Investigation of Failure Behavior of W/ (Zr55Cu30Al10Ni5)100-xNbx Composites during Compression Test [Volume 30, Issue 1, 2018, Pages 131-140]
  • Mehri, Ali The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Mehri, Fatemeh Effect of Milling and Heat Treatment on the Microstructure of 38wt%TiO2-36wt%NiO-26wt%C and the Influence of Produced Nanostructured Powder Mixtures on the Hydrogen Desorption from MgH2 [Volume 30, Issue 1, 2018, Pages 67-78]
  • Mirdamadi, Shamseddin Investigation of Failure Behavior of W/ (Zr55Cu30Al10Ni5)100-xNbx Composites during Compression Test [Volume 30, Issue 1, 2018, Pages 131-140]
  • Mohammadzadeh, Ahad Compacting Pressure Effect on Densification in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder [Volume 30, Issue 2, 2019, Pages 140-149]
  • Molaei Nejad, Esmaeil Fabrication of Fe/TiC Surface Composite on Carbon Steel Using SMAW Process [Volume 30, Issue 2, 2019, Pages 57-66]
  • Mollazadeh Beidokhti, Sahar Characterization of Apatite Glass-Ceramic Coatings on Ti-6Al-4V Substrate by Sol-Gel Method for Medical Application [Volume 30, Issue 2, 2019, Pages 91-102]
  • Moradi Yazdi, Negin Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Mostaan, Hossein Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball [Volume 30, Issue 1, 2018, Pages 141-154]

N

  • Naghizadeh, Rahim Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Nasirpour, Zeinab Selective Extraction of Copper from Nickel by D2EHPA in the Presence of Tartaric Acid and Sodium Acetate Additives [Volume 30, Issue 2, 2019, Pages 1-8]
  • Nategh, saeed Investigation of Failure Behavior of W/ (Zr55Cu30Al10Ni5)100-xNbx Composites during Compression Test [Volume 30, Issue 1, 2018, Pages 131-140]
  • Norbakhsh, Mehrdad The Effect of Low Temperature Austempering on Microstructure, Mechanical and Wear Properties of AISI 52100 Steel [Volume 30, Issue 1, 2018, Pages 13-28]

R

  • Rafiei, Mahdi Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball [Volume 30, Issue 1, 2018, Pages 141-154]
  • Rafiei, Mahdi Dissimilar Joint Properties of Cu to 304 Stainless Steel by GTAW Process [Volume 30, Issue 2, 2019, Pages 21-30]
  • Rajabloo, Mohamad Javad Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball [Volume 30, Issue 1, 2018, Pages 141-154]
  • Rastegari, Saied Investigation of Oxidation Properties of YSZ with Al2O3/YAG Composite Thermal Barrier Coating [Volume 30, Issue 2, 2019, Pages 31-42]
  • Raygan, shahram Effect of Milling and Heat Treatment on the Microstructure of 38wt%TiO2-36wt%NiO-26wt%C and the Influence of Produced Nanostructured Powder Mixtures on the Hydrogen Desorption from MgH2 [Volume 30, Issue 1, 2018, Pages 67-78]
  • Razavi, Seyed Soroush e din The Effect of Number and Width of Baffles on Mixing Time in Copper Solvent Extraction Dynamic Mixers: CFD Simulation and Direct Photography [Volume 30, Issue 2, 2019, Pages 113-118]
  • Rezaie, Hamid Reza Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]

S

  • Sadeghzadeh-Attar, Abbas Dielectric Properties of Nanostructured Bi4Ti3O12 and Bi12TiO20 Films Prepared by Sol-Gel Method [Volume 30, Issue 1, 2018, Pages 29-42]
  • Sadrnezhaad, SK Improvement of the Photovoltaic Performance of Dye-Sensitized Solar Cell by Using TiO2:CNT Nanocomposite Photoanode [Volume 30, Issue 1, 2018, Pages 101-110]
  • Saeid, Tohid Friction Stir Welding of 430 Ferritic Stainless Steel [Volume 30, Issue 2, 2019, Pages 119-126]
  • Salehi, Mohammad Taghi Study of Dynamic Precipitation during Severe Plastic Deformation of Cast AZ91 Alloy and Its Influence on Microstructure and Mechanical Properties [Volume 30, Issue 2, 2019, Pages 9-20]
  • Samim Banihashem, Hamid Reza Study of Dynamic Precipitation during Severe Plastic Deformation of Cast AZ91 Alloy and Its Influence on Microstructure and Mechanical Properties [Volume 30, Issue 2, 2019, Pages 9-20]
  • Soltanieh, Mansour Thermodynamics and Kinetics of Immersion Behavior of IC221M Alloy as a Separator in Molten Carbonate Fuel Cell [Volume 30, Issue 1, 2018, Pages 43-54]
  • Soltanieh, Mansour Rapid Heating Effects on Microstructure and Thermal Stability of a Ni3Al Base Alloy, IC221M [Volume 30, Issue 1, 2018, Pages 91-100]

T

  • Tajer Kajinebaf, Vahideh Effect of Ceria on Phase Behavior and Photocatalytic Properties of Colloidal and Polymeric Nano-Titania [Volume 30, Issue 1, 2018, Pages 111-120]
  • Talebi, Amir Effect of Bainite Morphology on the Mechanical Properties of a Ferrite- Bainite- Martensite Triple-Phase Steel [Volume 30, Issue 1, 2018, Pages 55-66]
  • Talebian, Milad Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Tavakkoli Dehaghi, Omid Dissimilar Joint Properties of Cu to 304 Stainless Steel by GTAW Process [Volume 30, Issue 2, 2019, Pages 21-30]
  • Tavoosi, Majid The Effect of Low Temperature Austempering on Microstructure, Mechanical and Wear Properties of AISI 52100 Steel [Volume 30, Issue 1, 2018, Pages 13-28]

W

  • Wang, Jin Tao The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]